Please do take note of the following notice.
Please Take Note the Annual Price Adjustment will take effect from 03 October 2016 onwards
Thursday, September 8, 2016
IMPORTANT NOTICE 08 SEPTEMBER 2016
Dear Valued Customers,
Please do take note of the following notice.
Please Take Note the Annual Price Adjustment will take effect from 03 October 2016 onwards
Please do take note of the following notice.
Please Take Note the Annual Price Adjustment will take effect from 03 October 2016 onwards
Friday, September 2, 2016
UPDATE 2016 SEPT 02
------------------------------
# Application example
------------------------------
# Application example
------------------------------
5. Speed Control of SINAMICS V90 with SIMATIC S7-1200 via PROFINET
(7/19/2016) [109739222]
(7/19/2016) [109739222]
Basic application for speed control with SIMATIC S7-1200 and
SINAMICS V90 via PROFINET
For products:6SL3210-5FB10-1UF0, 6SL3210-5FB10-2UF0,...
SINAMICS V90 via PROFINET
For products:6SL3210-5FB10-1UF0, 6SL3210-5FB10-2UF0,...
more
=> CLICK HERE
------------------------------
9. Signaling and Switching via SMS with S7-1200 and CP 1242-7 GPRS V2
(Set 32)
(7/19/2016) [58638283]
=> CLICK HERE
------------------------------
9. Signaling and Switching via SMS with S7-1200 and CP 1242-7 GPRS V2
(Set 32)
(7/19/2016) [58638283]
A SIMATIC S7-1200 station shall be used to send important messages
as SMS message to mobile maintenance staff via the CP 1242-7 GPRS
V2.
For products:6GK7242-7KX31-0XE0, 6GK7243-7KX30-0XE0
as SMS message to mobile maintenance staff via the CP 1242-7 GPRS
V2.
For products:6GK7242-7KX31-0XE0, 6GK7243-7KX30-0XE0
more
=> CLICK HERE
------------------------------
16. Connecting Telecontrol Stations to a Telecontrol Center in just a
few Steps
(7/19/2016) [89633466]
=> CLICK HERE
------------------------------
16. Connecting Telecontrol Stations to a Telecontrol Center in just a
few Steps
(7/19/2016) [89633466]
In these videos, we will show you how to configure a SIMATIC S7
telecontrol station and connect it to a telecontrol center in just
a few steps.
For products:6NH7997-7CA31-0GA1,
6NH7997-7CA31-2GA2,...
telecontrol station and connect it to a telecontrol center in just
a few steps.
For products:6NH7997-7CA31-0GA1,
6NH7997-7CA31-2GA2,...
more
=> CLICK HERE
------------------------------
18. Diagnostics in User Program with S7-1200
(7/22/2016) [109483251]
=> CLICK HERE
------------------------------
18. Diagnostics in User Program with S7-1200
(7/22/2016) [109483251]
The diagnostics of devices, modules and networks play an
ever-increasing role in automation technology. By diagnosing with a
user program, faulty modules can be detected. This enables you to
also program responses to diagnostic messages.
For
products:6ES7822-1BA03-4YE5, 6ES7822-1AA03-2YA6,...
ever-increasing role in automation technology. By diagnosing with a
user program, faulty modules can be detected. This enables you to
also program responses to diagnostic messages.
For
products:6ES7822-1BA03-4YE5, 6ES7822-1AA03-2YA6,...
------------------------------
# Download
------------------------------
# Download
------------------------------
16. SIWAREX MULTISCALE – Software for batching plants
(7/12/2016) [109739136]
(7/12/2016) [109739136]
more
=> CLICK HERE
------------------------------
SIMATIC Automation Tool - the commissioning and service operation
tool for S7-1200, S7-1500 including ET 200SP CPU and
decentralized IO modules
(8/10/2016) [98161300]
=> CLICK HERE
------------------------------
SIMATIC Automation Tool - the commissioning and service operation
tool for S7-1200, S7-1500 including ET 200SP CPU and
decentralized IO modules
(8/10/2016) [98161300]
Hereby it takes place the deployment of the SIMATIC Automation
Tool.
For products:6ES7513-1AL00-0AB0, 6ES7211-1HD30-0XB0,...
Tool.
For products:6ES7513-1AL00-0AB0, 6ES7211-1HD30-0XB0,...
more
=> CLICK HERE
------------------------------
10. Download firmware 1.4.4 for CP 1242-7 GPRS (6GK7242-7KX30-0XE0)
(8/18/2016) [109740216]
=> CLICK HERE
------------------------------
10. Download firmware 1.4.4 for CP 1242-7 GPRS (6GK7242-7KX30-0XE0)
(8/18/2016) [109740216]
Firmware version 1.4.4 for CP 1242-7 GPRS (6GK7242-7KX30-0XE0) is
available for download.
For products:6GK7242-7KX30-0XE0
available for download.
For products:6GK7242-7KX30-0XE0
------------------------------
# FAQ
------------------------------
# FAQ
------------------------------
35. Which information does Technical Support need regarding inquiries
about SCALANCE products?
(7/14/2016) [109738574]
about SCALANCE products?
(7/14/2016) [109738574]
In order to have the Technical Support answer a service request
precisely and quickly, a description as precise as possible of the
unclear issue is necessary. Below is a list of the information
required by the Technical Support for inquiries about SCALANCE
products.
For products:6GK5302-7GD00-4GA3,
6GK5213-3BF00-2AB2,...
precisely and quickly, a description as precise as possible of the
unclear issue is necessary. Below is a list of the information
required by the Technical Support for inquiries about SCALANCE
products.
For products:6GK5302-7GD00-4GA3,
6GK5213-3BF00-2AB2,...
more
=> CLICK HERE
------------------------------
27. In STEP 7 (TIA Portal), how do you program the opening and closing
of shutters at sunrise and sunset respectively for the
S7-1200/S7-1500?
(7/20/2016) [90937703]
=> CLICK HERE
------------------------------
27. In STEP 7 (TIA Portal), how do you program the opening and closing
of shutters at sunrise and sunset respectively for the
S7-1200/S7-1500?
(7/20/2016) [90937703]
You can determine sunrise and sunset using an astronomical
algorithm. You simply have to specify the longitude and latitude
coordinates of the location concerned as parameters and set the CPU
clock to UTC time.
For products:6ES7513-1AL00-0AB0,
6ES7211-1HD30-0XB0,...
algorithm. You simply have to specify the longitude and latitude
coordinates of the location concerned as parameters and set the CPU
clock to UTC time.
For products:6ES7513-1AL00-0AB0,
6ES7211-1HD30-0XB0,...
more
=> CLICK HERE
------------------------------
13. What should you watch for with configuration control (option
handling) with fail-safe controllers S7-1200 and S7-1500?
(8/18/2016) [109481852]
=> CLICK HERE
------------------------------
13. What should you watch for with configuration control (option
handling) with fail-safe controllers S7-1200 and S7-1500?
(8/18/2016) [109481852]
With configuration control (option handling) with F modules
additional diagnostics are offered.
For
products:6ES7138-4FC00-0AB0, 6ES7138-7FN00-0AB0,...
additional diagnostics are offered.
For
products:6ES7138-4FC00-0AB0, 6ES7138-7FN00-0AB0,...
------------------------------
# Manual
------------------------------
# Manual
------------------------------
53. SIMATIC NET Industrial Ethernet/PROFINET Industrial Ethernet -
System Manual
(7/15/2016) [27069465]
System Manual
(7/15/2016) [27069465]
05/2016, System manual, C79000-G8976-C242-09
For
products:6GK7177-1MA10-0AA0, 6GK1716-0HB00-3AN0,...
For
products:6GK7177-1MA10-0AA0, 6GK1716-0HB00-3AN0,...
more
=> CLICK HERE
------------------------------
55. SIMATIC NET Industrial Ethernet / PROFINET Passive network
components - System Manual
(7/15/2016) [84922825]
=> CLICK HERE
------------------------------
55. SIMATIC NET Industrial Ethernet / PROFINET Passive network
components - System Manual
(7/15/2016) [84922825]
05/2016, System manual, C79000-G8976-C271-01
For
products:6XV1870-3RH60, 6XV1871-5BN15,...
For
products:6XV1870-3RH60, 6XV1871-5BN15,...
more
=> CLICK HERE
------------------------------
67. Making the transition from S7-200 to S7-1200
(7/18/2016) [39637591]
=> CLICK HERE
------------------------------
67. Making the transition from S7-200 to S7-1200
(7/18/2016) [39637591]
11/2014, Getting Started, A5E02486860-AB
For
products:6ES7274-1XF30-0XA0, 6ES7211-1HD30-0XB0,...
For
products:6ES7274-1XF30-0XA0, 6ES7211-1HD30-0XB0,...
------------------------------
# Product note
------------------------------
# Product note
------------------------------
74. SIPLUS extreme – With effect from 1 October 2016, the entire SIPLUS
LOGO! 6 family will be declared phase-out products (PM400).
(7/19/2016) [109739279]
LOGO! 6 family will be declared phase-out products (PM400).
(7/19/2016) [109739279]
From the SIPLUS extreme product range, the entire SIPLUS LOGO! 6
family will be declared phase-out products (PM400) as per 1 October
2016. From this date, SIPLUS LOGO! 6 products will remain available
to customers for at least 1 year as new parts and up to 4 years as
replacement parts. The SIPLUS extreme product range features
refined components based on Siemens Industry standard products.
For products:6AG1052-2MD00-2BA6, 6AG1052-1FB00-2BA6,...
family will be declared phase-out products (PM400) as per 1 October
2016. From this date, SIPLUS LOGO! 6 products will remain available
to customers for at least 1 year as new parts and up to 4 years as
replacement parts. The SIPLUS extreme product range features
refined components based on Siemens Industry standard products.
For products:6AG1052-2MD00-2BA6, 6AG1052-1FB00-2BA6,...
more
=> CLICK HERE
------------------------------
75. LOGO! CM EIB Announcement for product phase-out
(7/20/2016) [109739299]
=> CLICK HERE
------------------------------
75. LOGO! CM EIB Announcement for product phase-out
(7/20/2016) [109739299]
With effect from 1 October 2016, the LOGO! communication module EIB
will be declared phase-out product (PM400).
For
products:6BK1700-0BA00-0AA2
will be declared phase-out product (PM400).
For
products:6BK1700-0BA00-0AA2
Interesting references
15. Solutions with which our customers have success
15. Solutions with which our customers have success
LOGO! automates the spas of the Starpool company
LOGO! 8 automates and controls all parameters and functionalities, such as lighting, heating, electrical loads and emotional path cycles in the spa.
The Web server function integrated in LOGO! 8 has proven its worth because it is now possible to monitor the status of all spas installed by Starpool all over the world.
--> Film
--> www.siemens.com/logo
LOGO! 8 automates and controls all parameters and functionalities, such as lighting, heating, electrical loads and emotional path cycles in the spa.
The Web server function integrated in LOGO! 8 has proven its worth because it is now possible to monitor the status of all spas installed by Starpool all over the world.
--> Film
--> www.siemens.com/logo
Monday, August 1, 2016
UPDATE 2016AUG01
------------------------------
# Download
------------------------------
27. Download Firmware 2.1.60 for CP 1242-7 V2, CP 1243-7 LTE, CP 1243-8
IRC , CP 1243-1
(6/28/2016) [109738444]
Download Firmware 2.1.60 for CP 1242-7 V2, CP 1243-7 LTE, CP 1243-8
IRC , CP 1243-1
For products:6GK7243-1BX30-0XE0,
6GK7243-7KX30-0XE0,...
more
=> CLICK HERE
------------------------------
# Download
------------------------------
27. Download Firmware 2.1.60 for CP 1242-7 V2, CP 1243-7 LTE, CP 1243-8
IRC , CP 1243-1
(6/28/2016) [109738444]
Download Firmware 2.1.60 for CP 1242-7 V2, CP 1243-7 LTE, CP 1243-8
IRC , CP 1243-1
For products:6GK7243-1BX30-0XE0,
6GK7243-7KX30-0XE0,...
more
=> CLICK HERE
------------------------------
------------------------------
# Application example
------------------------------
------------------------------
3. Sending and Receiving SMS Messages via a SCALANCE M Router
(6/15/2016) [54361177]
A SIMATIC S7-1200/1500 station is to automatically send important
information about the plant status, alarm messages or warnings to
mobile service personnel using the SCALANCE M874/M876
router.
For products:6GK5874-3AA00-2AA2,6G
more
=> CLICK HERE
------------------------------
(6/15/2016) [54361177]
A SIMATIC S7-1200/1500 station is to automatically send important
information about the plant status, alarm messages or warnings to
mobile service personnel using the SCALANCE M874/M876
router.
For products:6GK5874-3AA00-2AA2,6G
more
=> CLICK HERE
------------------------------
6. Communication with S7-CPU via BACnet Gateway
(6/13/2016) [109476182]
This application example Shows, how to configure a communivation
between SIMATIC PLC and a BACnet Network with a gateway.
For
products:6ES7513-1AL00-0AB0, 6ES7211-1HD30-0XB0,...
more
=> CLICK HERE
------------------------------
(6/13/2016) [109476182]
This application example Shows, how to configure a communivation
between SIMATIC PLC and a BACnet Network with a gateway.
For
products:6ES7513-1AL00-0AB0, 6ES7211-1HD30-0XB0,...
more
=> CLICK HERE
------------------------------
10. Modular machine concepts with PROFINET (video)
(6/16/2016) [109486048]
Increasingly shorter product life cycles also present a challenge
to production machines. Different variants of a product shall
always be produced with the same machine. Therefore the design of
the machines has to be modular. As a result of which the following
sometimes occurs: Different projects for the numerous individual
machine variants.
For products:6ES7513-1AL00-0AB0,
6ES7155-5AA00-0AB0,...
more
=> CLICK HERE
------------------------------
(6/16/2016) [109486048]
Increasingly shorter product life cycles also present a challenge
to production machines. Different variants of a product shall
always be produced with the same machine. Therefore the design of
the machines has to be modular. As a result of which the following
sometimes occurs: Different projects for the numerous individual
machine variants.
For products:6ES7513-1AL00-0AB0,
6ES7155-5AA00-0AB0,...
more
=> CLICK HERE
------------------------------
------------------------------
# FAQ
------------------------------
17. What are the protection classes of the electrical equipment of
automation technology?
(6/16/2016) [109737167]
Electrical equipment must be of a specific protection class
corresponding to its loading through foreign objects and water in
compliance with DIN EN 60529.
For products:6ES7413-2XG00-0AB0,
6ES7151-7AA13-0AB0,...
more
=> CLICK HERE
------------------------------
# FAQ
------------------------------
17. What are the protection classes of the electrical equipment of
automation technology?
(6/16/2016) [109737167]
Electrical equipment must be of a specific protection class
corresponding to its loading through foreign objects and water in
compliance with DIN EN 60529.
For products:6ES7413-2XG00-0AB0,
6ES7151-7AA13-0AB0,...
more
=> CLICK HERE
------------------------------
18. What is the difference between the PROFIsafe address types 1 and 2
in relation to the uniqueness of the PROFIsafe address?
(6/16/2016) [109479905]
The PROFIsafe address is for the unique addressing of the F IO and
for protecting standard address mechanisms like IP addresses. Here,
the uniqueness is defined differently with the F IO of the
PROFIsafe address type 1 and with the F IO of the PROFIsafe address
type 2. The differences are explained below.
For
products:6ES7153-2DA80-0XB0, 6ES7157-0AD00-0XA0,...
more
=> CLICK HERE
------------------------------
in relation to the uniqueness of the PROFIsafe address?
(6/16/2016) [109479905]
The PROFIsafe address is for the unique addressing of the F IO and
for protecting standard address mechanisms like IP addresses. Here,
the uniqueness is defined differently with the F IO of the
PROFIsafe address type 1 and with the F IO of the PROFIsafe address
type 2. The differences are explained below.
For
products:6ES7153-2DA80-0XB0, 6ES7157-0AD00-0XA0,...
more
=> CLICK HERE
------------------------------
23. How do you set the consistency of the transfer areas in the project
of the S7-1200 when the communication module CM 1242-5 is
incorporated via GSD file in the project of the DP master?
(6/16/2016) [109736643]
The GSD file of the CM 1242-5 has only input and output modules
with consistency over the entire length. If you incorporate the CM
1242-5 via GSD file in the project of the DP master, then in the
project of the S7-1200 you have to set the consistency of the
configured transfer areas to "Total length".
For
products:6GK7242-5DX30-0XE0
more
=> CLICK HERE
------------------------------
of the S7-1200 when the communication module CM 1242-5 is
incorporated via GSD file in the project of the DP master?
(6/16/2016) [109736643]
The GSD file of the CM 1242-5 has only input and output modules
with consistency over the entire length. If you incorporate the CM
1242-5 via GSD file in the project of the DP master, then in the
project of the S7-1200 you have to set the consistency of the
configured transfer areas to "Total length".
For
products:6GK7242-5DX30-0XE0
more
=> CLICK HERE
------------------------------
18. Which ports are released for Modbus/TCP communication and how many
Modbus clients can communicate with a SIMATIC S7 CPU as Modbus
server?
(7/5/2016) [34010717]
Ports released for Modbus/TCP communication and maximum number of
Modbus clients that can communicate with a SIMATIC S7 CPU as Modbus
server.
For products:6ES7317-7TK10-0AB0,
6ES7317-2FJ10-0AB0,...
more
=> CLICK HERE
------------------------------
Modbus clients can communicate with a SIMATIC S7 CPU as Modbus
server?
(7/5/2016) [34010717]
Ports released for Modbus/TCP communication and maximum number of
Modbus clients that can communicate with a SIMATIC S7 CPU as Modbus
server.
For products:6ES7317-7TK10-0AB0,
6ES7317-2FJ10-0AB0,...
more
=> CLICK HERE
------------------------------
20. How do you copy memory areas and structured data in STEP 7 (TIA
Portal)?
(7/5/2016) [42603881]
With S7-1200/S7-1500, if you want to copy memory areas, in STEP 7
(TIA Portal) you use the instructions "MOVE_BLK", "MOVE",
"Serialize" and "Deserialize".
For products:6ES7513-1AL00-0AB0,
6ES7211-1HD30-0XB0,...
more
=> CLICK HERE
------------------------------
Portal)?
(7/5/2016) [42603881]
With S7-1200/S7-1500, if you want to copy memory areas, in STEP 7
(TIA Portal) you use the instructions "MOVE_BLK", "MOVE",
"Serialize" and "Deserialize".
For products:6ES7513-1AL00-0AB0,
6ES7211-1HD30-0XB0,...
more
=> CLICK HERE
------------------------------
24. How can a WIPOTEC digital load cell be used with SIWAREX WP231?
(7/7/2016) [109739048]
FRAGE: How can a WIPOTEC digital load cell be used with
SIWAREX WP231? ...
For products:7MH4960-2AA01
more
=> CLICK HERE
------------------------------
(7/7/2016) [109739048]
FRAGE: How can a WIPOTEC digital load cell be used with
SIWAREX WP231? ...
For products:7MH4960-2AA01
more
=> CLICK HERE
------------------------------
------------------------------
# MANUAL
------------------------------
# MANUAL
------------------------------
29. SIMATIC S7-1200/S7-1500/ET 200MP/ET 200SP/ET 200S/ET 200M/ET
200iSP/ET 200pro/ET 200eco Updated standards
(7/5/2016) [109738983]
06/2016, Product information, A5E38491412-AA
For
products:6ES7138-4FC00-0AB0, 6ES7833-1FA13-0YA5,...
more
=> CLICK HERE
------------------------------
200iSP/ET 200pro/ET 200eco Updated standards
(7/5/2016) [109738983]
06/2016, Product information, A5E38491412-AA
For
products:6ES7138-4FC00-0AB0, 6ES7833-1FA13-0YA5,...
more
=> CLICK HERE
------------------------------
33. SIMATIC NET S7-1200 - TeleControl CP 1243-7 LTE - Operating
Instructions
(7/4/2016) [109476704]
05/2016, Operating instructions, C79000-G8976-C381-02
For
products:6GK7243-7SX30-0XE0, 6GK7243-7KX30-0XE0
more
=> CLICK HERE
------------------------------
34. LICENSE CONDITIONS AND COPYRIGHT NOTICES CP 1242-7 GPRS V2, CP
1243-7 LTE
(7/4/2016) [109476705]
05/2016, Read me
For products:6GK7243-7SX30-0XE0,
6GK7243-7KX30-0XE0
more
=> CLICK HERE
------------------------------
Instructions
(7/4/2016) [109476704]
05/2016, Operating instructions, C79000-G8976-C381-02
For
products:6GK7243-7SX30-0XE0, 6GK7243-7KX30-0XE0
more
=> CLICK HERE
------------------------------
34. LICENSE CONDITIONS AND COPYRIGHT NOTICES CP 1242-7 GPRS V2, CP
1243-7 LTE
(7/4/2016) [109476705]
05/2016, Read me
For products:6GK7243-7SX30-0XE0,
6GK7243-7KX30-0XE0
more
=> CLICK HERE
------------------------------
------------------------------
# Product note
------------------------------
# Product note
------------------------------
59. Delivery release CP 1243-7 LTE (US)
(7/7/2016) [109739050]
The CP 1243-7 LTE variant (6GK7243-7SX30-0XE0) for the North
American market is available ex stock with immediate effect. Thus,
the following mobile wireless standard frequencies are supported
from now on:
For products:6GK7243-7SX30-0XE0
more
=> CLICK HERE
------------------------------
60. Product announcement, sales and delivery release touch pen system
(7/5/2016) [109738699]
The touch pen system, which has been designed to operate capacitive
and recessive touch displays, has been released for delivery with
immediate effect.
For products:6AV2181-8AV20-0AX0,
6AV2181-8AV60-0AX0
more
=> CLICK HERE
------------------------------
(7/7/2016) [109739050]
The CP 1243-7 LTE variant (6GK7243-7SX30-0XE0) for the North
American market is available ex stock with immediate effect. Thus,
the following mobile wireless standard frequencies are supported
from now on:
For products:6GK7243-7SX30-0XE0
more
=> CLICK HERE
------------------------------
60. Product announcement, sales and delivery release touch pen system
(7/5/2016) [109738699]
The touch pen system, which has been designed to operate capacitive
and recessive touch displays, has been released for delivery with
immediate effect.
For products:6AV2181-8AV20-0AX0,
6AV2181-8AV60-0AX0
more
=> CLICK HERE
------------------------------
Monday, June 13, 2016
UPDATE 13 JUNE 2016
------------------------------
# Application example
------------------------------
# Application example
------------------------------
5. Sending and Receiving SMS Messages via a SCALANCE M Router
(5/23/2016) [54361177]
A SIMATIC S7-1200/1500 station is to automatically send important
information about the plant status, alarm messages or warnings to
mobile service personnel using the SCALANCE M874/M876
router.
For products:6GK5874-3AA00-2AA2,6G
more
=> CLICK HERE
------------------------------
1. Inter-Station Communication between S7-1200 Stations Using TCSB V3
via CP 1242-7 V2
(5/17/2016) [58099765]
An automation infrastructure contains S7-1200 substations that are
to exchange data in a cost-effective way on a wireless
basis.
For products:6GK7242-7KX31-0XE0
more
=> CLICK HERE
------------------------------
2. Data communication between S7-1200 stations and TeleControl Server
Basic V3 via CP 1242-7 V2 and CP1243-1
(5/17/2016) [39863979]
An automation infrastructure contains S7-1200 substations which
shall communicate cost-effectively with a central station via the
mobile communications network or via Ethernet. The TeleControl
Server Basic V3 software is installed in the central
station.
For products:6GK7242-7KX31-0XE0, 6GK7243-1BX30-0XE0
more
=> CLICK HERE
------------------------------
3. Example Blocks for WinCC (TIA Portal) and STEP 7 (TIA Portal) for
S7-1200 and S7-1500 with SCL
(5/17/2016) [66839614]
The function scope of WinCC (TIA Portal) and STEP 7 (TIA Portal)
can be expanded by technology blocks.
For
products:6AV2124-1MC01-0AX0, 6ES7513-1AL00-0AB0,...
more
=> CLICK HERE
------------------------------
(5/23/2016) [54361177]
A SIMATIC S7-1200/1500 station is to automatically send important
information about the plant status, alarm messages or warnings to
mobile service personnel using the SCALANCE M874/M876
router.
For products:6GK5874-3AA00-2AA2,6G
more
=> CLICK HERE
------------------------------
1. Inter-Station Communication between S7-1200 Stations Using TCSB V3
via CP 1242-7 V2
(5/17/2016) [58099765]
An automation infrastructure contains S7-1200 substations that are
to exchange data in a cost-effective way on a wireless
basis.
For products:6GK7242-7KX31-0XE0
more
=> CLICK HERE
------------------------------
2. Data communication between S7-1200 stations and TeleControl Server
Basic V3 via CP 1242-7 V2 and CP1243-1
(5/17/2016) [39863979]
An automation infrastructure contains S7-1200 substations which
shall communicate cost-effectively with a central station via the
mobile communications network or via Ethernet. The TeleControl
Server Basic V3 software is installed in the central
station.
For products:6GK7242-7KX31-0XE0, 6GK7243-1BX30-0XE0
more
=> CLICK HERE
------------------------------
3. Example Blocks for WinCC (TIA Portal) and STEP 7 (TIA Portal) for
S7-1200 and S7-1500 with SCL
(5/17/2016) [66839614]
The function scope of WinCC (TIA Portal) and STEP 7 (TIA Portal)
can be expanded by technology blocks.
For
products:6AV2124-1MC01-0AX0, 6ES7513-1AL00-0AB0,...
more
=> CLICK HERE
------------------------------
4. Communication between two LOGO! Controllers by means of LOGO! CMR
and SMS
(5/3/2016) [109483740]
In order to supply a remote, elevated region with water, a water
reservoir is installed and filled by a pump in the valley. The pump
is to be switched on and off, depending from the filling level of
the water reservoir.
For products:6EP1331-1SH01,
6ED1052-2MD00-0BA6,...
more
=> CLICK HERE
------------------------------
and SMS
(5/3/2016) [109483740]
In order to supply a remote, elevated region with water, a water
reservoir is installed and filled by a pump in the valley. The pump
is to be switched on and off, depending from the filling level of
the water reservoir.
For products:6EP1331-1SH01,
6ED1052-2MD00-0BA6,...
more
=> CLICK HERE
------------------------------
23. How do you connect a PT100 sensor to the LOGO! analog expansion
module AM2 PT100 or AM2 RTD?
(4/25/2016) [23671451]
To the LOGO! analog expansion module AM2 PT100 or AM2 RTD you can
connect sensors with 2-conductor, 3-conductor or 4-conductor
connections.
For products:6ED1055-1MD00-0BA1,
6ED1055-1MD00-0BA2,...
more
=> CLICK HERE
------------------------------
24. With LOGO! how can you configure switching thresholds for analog
signals?
(5/4/2016) [24003057]
Depending on the application you have two different function blocks
(analog comparator and analog watchdog) to choose from in LOGO!
SoftComfort for defining switching thresholds.
For
products:6ED1058-0BA02-0YA0, 6ED1058-0BA02-0YA1,...
more
=> CLICK HERE
------------------------------
25. How do you transform digital pulses into an analog value with
LOGO!?
(4/27/2016) [50083269]
Cyclic determination of the number of the digital pulses in a
defined time period and read-out as an analog value via an analog
network input.
For products:6ED1058-0BA02-0YA1,
6ED1058-0CA02-0YE1,...
more
=> CLICK HERE
------------------------------
module AM2 PT100 or AM2 RTD?
(4/25/2016) [23671451]
To the LOGO! analog expansion module AM2 PT100 or AM2 RTD you can
connect sensors with 2-conductor, 3-conductor or 4-conductor
connections.
For products:6ED1055-1MD00-0BA1,
6ED1055-1MD00-0BA2,...
more
=> CLICK HERE
------------------------------
24. With LOGO! how can you configure switching thresholds for analog
signals?
(5/4/2016) [24003057]
Depending on the application you have two different function blocks
(analog comparator and analog watchdog) to choose from in LOGO!
SoftComfort for defining switching thresholds.
For
products:6ED1058-0BA02-0YA0, 6ED1058-0BA02-0YA1,...
more
=> CLICK HERE
------------------------------
25. How do you transform digital pulses into an analog value with
LOGO!?
(4/27/2016) [50083269]
Cyclic determination of the number of the digital pulses in a
defined time period and read-out as an analog value via an analog
network input.
For products:6ED1058-0BA02-0YA1,
6ED1058-0CA02-0YE1,...
more
=> CLICK HERE
------------------------------
26. How do you change the password for the change of LOGO! mode?
(4/28/2016) [109482389]
LOGO! demands a password when you want to change from OP mode to
Admin mode. Here we show how to change this password.
For
products:6ED1052-2FB00-0BA8, 6ED1052-1HB00-0BA8,...
more
=> CLICK HERE
------------------------------
27. How do you monitor a connection between two LOGO! 8 basic modules?
(4/28/2016) [109483102]
To make sure that data is exchanged between two LOGO! basic modules
you have to monitor the connection.
For
products:6ED1052-1HB00-0BA8, 6ED1052-1FB00-0BA8,...
more
=> CLICK HERE
------------------------------
28. Which LOGO! device series can you use for a program created with
LOGO!Soft Comfort V8?
(5/4/2016) [109483221]
With LOGO!Soft Comfort V8 you can also create control programs for
previous LOGO! device series. However, you cannot load any programs
that use the new special functions or the new special function
parameters into LOGO! basic modules previous to device series
0BA8.
For products:6ED1058-0BA08-0YA1
more
=> CLICK HERE
(4/28/2016) [109482389]
LOGO! demands a password when you want to change from OP mode to
Admin mode. Here we show how to change this password.
For
products:6ED1052-2FB00-0BA8, 6ED1052-1HB00-0BA8,...
more
=> CLICK HERE
------------------------------
27. How do you monitor a connection between two LOGO! 8 basic modules?
(4/28/2016) [109483102]
To make sure that data is exchanged between two LOGO! basic modules
you have to monitor the connection.
For
products:6ED1052-1HB00-0BA8, 6ED1052-1FB00-0BA8,...
more
=> CLICK HERE
------------------------------
28. Which LOGO! device series can you use for a program created with
LOGO!Soft Comfort V8?
(5/4/2016) [109483221]
With LOGO!Soft Comfort V8 you can also create control programs for
previous LOGO! device series. However, you cannot load any programs
that use the new special functions or the new special function
parameters into LOGO! basic modules previous to device series
0BA8.
For products:6ED1058-0BA08-0YA1
more
=> CLICK HERE
Wednesday, May 4, 2016
Subscribe to:
Posts (Atom)