------------------------------
# Industry reference videos
------------------------------
# Industry reference videos
------------------------------
How can digitalization solve the challenges in the water industry?
------------------------------
# Product News
------------------------------
# Product News
------------------------------
Manual resuscitation devices (BVM or AMBU) in an automated way
The integrating factor - Greater connectivity for S7-1200
The new firmware 4.4 has added OPC UA to the many communication options
provided by Simatic S7-1200.
SIMATIC Robot Integrator – your shortcut to robotics
With the aid of this app, machine builders can integrate robots
from different manufacturers quickly and easily in TIA Portal
– without the need for any support whatsoever from external experts.
SIMATIC Live Twin Edge app
SIMATIC Live Twin enables you to implement simulation models on
Edge devices so that you can use virtual sensors instead of real ones.
In this way, complex modeling forecasts can help, for example,
to protect drives against overheating.
Innovations, news and much more:
Discover the new SIMATIC Controller website
It offers new content and stories on every aspect of innovative technologies
such as AI, virtual commissioning (VC) or motion control.
It offers new content and stories on every aspect of innovative technologies
such as AI, virtual commissioning (VC) or motion control.
Safety Evaluation Tool in TIA
The functions of the tried and tested Safety Evaluation Tool
will soon be integrated into the TIA Selection Tool.
This will soon give you even better control over machine safety.
You can find important information on integration here.
https://new.siemens.com/global/en/products/automation/topic-areas/safety-integrated/factory-automation/support/safety-evaluation-tool.html
------------------------------
# Application examples
# Application examples
------------------------------
2020-04-15
ID: 109747710
Basic Examples for Open User Communication (OUC)
By now, TCP/IP-based Open User Communication (OUC)
is the standard for communication with SIMATIC S7-CPUs.
For products:6ES7317-7TK10-0AB0, 6ES7317-2FK14-0AB0,...
= > https://support.industry.
Basic Examples for Open User Communication (OUC)
By now, TCP/IP-based Open User Communication (OUC)
is the standard for communication with SIMATIC S7-CPUs.
For products:6ES7317-7TK10-0AB0, 6ES7317-2FK14-0AB0,...
= > https://support.industry.
------------------------------
2020-04-14
ID: 109775729
The challenge for operators of photovoltaics (PV) power plants is
to achieve the highest possible energy yield with their plants.
Besides selecting the right technology, the best way to increase
yield is by using single-axis or dual-axis tracking systems.
This application, shows various methods how you can optimally
align your solar tracker in relation to the solar position.
For products:6ES7217-1AG40-0XB0, 6ES7212-1AE40-0XB0,...
= > https://support.industry.
------------------------------
2020-04-09
ID: 109772284
MindSphere is the cloud-based, open IoT operating system
from Siemens.
Using the "MindConnect IoT Extension" upgrade,
it is possible to connect devices to MindSphere over MQTT.
For products:6ES7217-1AG40-0XB0, 6GK7243-1BX30-0XE0,...
= > https://support.industry.
------------------------------
2020-04-07
ID: 68011496
How to program web pages, to control your plant
For products:6ES7822-1A.06-..
= > https://support.industry.
------------------------------
2020-04-01
ID: 109775881
The SIMATIC application "Line Control" is designed for controlling
the product machining while moving in a linear or feedthrough machine,
e.g. edge banding machines.
The application main functions include product position tracking
and switching on/off tools based on user machining programs.
For products:6ES7217-1AG40-0XB0, 6ES7212-1AE40-0XB0,...
= > https://support.industry.
------------------------------
# FAQ
------------------------------
# FAQ
------------------------------
2020-04-16
ID: 36752540
Which PROFINET nodes support automatic commissioning
(device replacement without interchangeable medium)
with topological configuration and device replacement
without topological configuration?
Automatic commissioning (device replacement without interchangeable medium)
with topological configuration and device replacement
without topological configuration?
For products:6SL3244-0BB13-1FA0, 6SL3544-0FA21-1FA0,...
= > https://support.industry.
ID: 36752540
Which PROFINET nodes support automatic commissioning
(device replacement without interchangeable medium)
with topological configuration and device replacement
without topological configuration?
Automatic commissioning (device replacement without interchangeable medium)
with topological configuration and device replacement
without topological configuration?
For products:6SL3244-0BB13-1FA0, 6SL3544-0FA21-1FA0,...
= > https://support.industry.
------------------------------
2020-04-09
ID: 39718396
How resistant to chemicals are the SIMATIC HMI operator panels
ID: 39718396
How resistant to chemicals are the SIMATIC HMI operator panels
and Industrial PCs?
Information about the chemical resistance of the fronts/surfaces
Information about the chemical resistance of the fronts/surfaces
of our SIMATIC HMI operator panels.
For products:6AV6545-0DB10-0AX0, 6AV7861-1TB00-1AA0,...
------------------------------
2020-04-09
ID: 24030688
Which PLUG types are available and with which devices can they be used?
Various PLUGs are available for SIMATIC NET products.
The following table gives an overview of functions and compatibility.
For products:6GK5748-1FC00-0AB0, 6GK5204-2BC10-2CA2,...
= > https://support.industry.
ID: 24030688
Which PLUG types are available and with which devices can they be used?
Various PLUGs are available for SIMATIC NET products.
The following table gives an overview of functions and compatibility.
For products:6GK5748-1FC00-0AB0, 6GK5204-2BC10-2CA2,...
= > https://support.industry.
------------------------------
2020-04-06
ID: 91438171
The current list of mobile telephone approvals is available at the link below.
For products:6GK5876-4AA00-2DA2, 6GK5875-0AA10-1CA2,...
= > https://support.industry.
ID: 91438171
The current list of mobile telephone approvals is available at the link below.
For products:6GK5876-4AA00-2DA2, 6GK5875-0AA10-1CA2,...
= > https://support.industry.
------------------------------
2020-04-03
ID: 45047113
How do you determine the release status of a SIMATIC device or module?
The release status (also known as product status or functional status)
describes the current hardware status of a product compared to the status
at the time of market launch. It is used for "versioning" the hardware
and is an important indicator of technical changes that have occurred
over the product life cycle.
This FAQ response shows you where to find this information on the device.
For products:6ES7272-1BA10-0YA1, 6ES7272-1AA10-0YA0,...
= > https://support.industry.
ID: 45047113
How do you determine the release status of a SIMATIC device or module?
The release status (also known as product status or functional status)
describes the current hardware status of a product compared to the status
at the time of market launch. It is used for "versioning" the hardware
and is an important indicator of technical changes that have occurred
over the product life cycle.
This FAQ response shows you where to find this information on the device.
For products:6ES7272-1BA10-0YA1, 6ES7272-1AA10-0YA0,...
= > https://support.industry.
------------------------------
2020-03-30
ID: 109778637
Why does the status of fail-safe inputs and outputs
not change in the watch (monitoring) table?
The watch table of a STEP 7 project contains inputs
and outputs of fail-safe modules.
However, you do not observe an expected status change
of the associated variables, as part of a wiring test,
for example.
For products:6ES7317-2FJ10-0AB0, 6ES7317-2FK14-0AB0,...
= > https://support.industry.
ID: 109778637
Why does the status of fail-safe inputs and outputs
not change in the watch (monitoring) table?
The watch table of a STEP 7 project contains inputs
and outputs of fail-safe modules.
However, you do not observe an expected status change
of the associated variables, as part of a wiring test,
for example.
For products:6ES7317-2FJ10-0AB0, 6ES7317-2FK14-0AB0,...
= > https://support.industry.
------------------------------
# Product note
------------------------------
------------------------------
2020-04-28
ID: 109765863
SITOP Power Supply Order Overview
04/2020, Brochure
For products:6EP1933-2EC41, 6EP1931-2FC01,...
= > https://support.industry.siemens.com/cs/ww/en/view/109765863
------------------------------------------------------------------------
2020-04-28
ID: 109765864
SITOP Power Supply. Brochure incl. technical data
04/2020, Brochure
For products:6EP1933-2EC41, 6EP1931-2FC01,...
= > https://support.industry.siemens.com/cs/ww/en/view/109765864
------------------------------------------------------------------------
2020-04-21
ID: 109486162
Status change for SIMATIC HMI products
This product notification provides information about
upcoming status changes to SIMATIC HMI products
because our SIMATIC products are subject to PLM
(Product Lifecycle Management).
For products:6AV6545-0DB10-0AX0, 6ES7272-1BA10-0YA1,...
= > https://support.industry.
ID: 109486162
Status change for SIMATIC HMI products
This product notification provides information about
upcoming status changes to SIMATIC HMI products
because our SIMATIC products are subject to PLM
(Product Lifecycle Management).
For products:6AV6545-0DB10-0AX0, 6ES7272-1BA10-0YA1,...
= > https://support.industry.
------------------------------
2020-04-16
ID: 109779407
Discontinuation of the S7-300 CPUs of the first generation
and associated memory cards
The S7-300 CPUs and associated FEPROM and RAM memory cards MC 951
will be finally discontinued, following a 10-year phase-out period,
as per October 1, 2020.
With this discontinuation, these CPUs and memory cards will no longer
be available as a spare part and can no longer be repaired.
State-of-the-art successors are available for all CPUs.
For products:6ES7951-1KM00-0AA0, 6ES7951-1KL00-0AA0,...
= > https://support.industry.
ID: 109779407
Discontinuation of the S7-300 CPUs of the first generation
and associated memory cards
The S7-300 CPUs and associated FEPROM and RAM memory cards MC 951
will be finally discontinued, following a 10-year phase-out period,
as per October 1, 2020.
With this discontinuation, these CPUs and memory cards will no longer
be available as a spare part and can no longer be repaired.
State-of-the-art successors are available for all CPUs.
For products:6ES7951-1KM00-0AA0, 6ES7951-1KL00-0AA0,...
= > https://support.industry.
------------------------------
2020-03-31
ID: 109773287
SITRAIN Course: PROFINET and IP based communication with SIMATIC
controllers
This course shows you the possibilities PROFINET and Industrial Ethernet
offer and enables you to implement efficient communication with SIMATIC
controllers.
For products:6ES7212-0AA51-0AA0, 6ES7822-1AA03-2YA6,...
= > https://support.industry.
ID: 109773287
SITRAIN Course: PROFINET and IP based communication with SIMATIC
controllers
This course shows you the possibilities PROFINET and Industrial Ethernet
offer and enables you to implement efficient communication with SIMATIC
controllers.
For products:6ES7212-0AA51-0AA0, 6ES7822-1AA03-2YA6,...
= > https://support.industry.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.