UPDATE 2016 SEPT 02

------------------------------------------------------------------------
#  Application example
------------------------------------------------------------------------

5. Speed Control of SINAMICS V90 with SIMATIC S7-1200 via PROFINET
 (7/19/2016) [109739222]

   Basic application for speed control with SIMATIC S7-1200 and
   SINAMICS V90 via PROFINET
 
For products:6SL3210-5FB10-1UF0, 6SL3210-5FB10-2UF0,...

   more
   => CLICK HERE
-----------------------------------------------------------------------
9. Signaling and Switching via SMS with S7-1200 and CP 1242-7 GPRS V2
   (Set 32)
 (7/19/2016) [58638283]

   A SIMATIC S7-1200 station shall be used to send important messages
   as SMS message to mobile maintenance staff via the CP 1242-7 GPRS
   V2.
For products:6GK7242-7KX31-0XE0, 6GK7243-7KX30-0XE0

   more
   => CLICK HERE
------------------------------------------------------------------------
16. Connecting Telecontrol Stations to a Telecontrol Center in just a
   few Steps
 (7/19/2016) [89633466]

   In these videos, we will show you how to configure a SIMATIC S7
   telecontrol station and connect it to a telecontrol center in just
   a few steps.
For products:6NH7997-7CA31-0GA1,
   6NH7997-7CA31-2GA2,...

   more
   => CLICK HERE
------------------------------------------------------------------------
18. Diagnostics in User Program with S7-1200
 (7/22/2016) [109483251]

   The diagnostics of devices, modules and networks play an
   ever-increasing role in automation technology. By diagnosing with a
   user program, faulty modules can be detected. This enables you to
   also program responses to diagnostic messages.
For
   products:6ES7822-1BA03-4YE5, 6ES7822-1AA03-2YA6,...

   more
   => CLICK HERE
------------------------------------------------------------------------

------------------------------------------------------------------------
#  Download
------------------------------------------------------------------------

16. SIWAREX MULTISCALE – Software for batching plants
 (7/12/2016) [109739136]

   more
   => CLICK HERE
------------------------------------------------------------------------
SIMATIC Automation Tool - the commissioning and service operation
   tool for S7-1200, S7-1500 including ET 200SP CPU and
   decentralized IO modules
 (8/10/2016) [98161300]

   Hereby it takes place the deployment of the SIMATIC Automation
   Tool.
For products:6ES7513-1AL00-0AB0, 6ES7211-1HD30-0XB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------
10. Download firmware 1.4.4 for CP 1242-7 GPRS (6GK7242-7KX30-0XE0)
 (8/18/2016) [109740216]

   Firmware version 1.4.4 for CP 1242-7 GPRS (6GK7242-7KX30-0XE0) is
   available for download.
For products:6GK7242-7KX30-0XE0

   more
   => CLICK HERE
------------------------------------------------------------------------

------------------------------------------------------------------------
#  FAQ
------------------------------------------------------------------------

35. Which information does Technical Support need regarding inquiries
   about SCALANCE products?
 (7/14/2016) [109738574]

   In order to have the Technical Support answer a service request
   precisely and quickly, a description as precise as possible of the
   unclear issue is necessary. Below is a list of the information
   required by the Technical Support for inquiries about SCALANCE
   products.
For products:6GK5302-7GD00-4GA3,
   6GK5213-3BF00-2AB2,...

   more
   => CLICK HERE
------------------------------------------------------------------------
27. In STEP 7 (TIA Portal), how do you program the opening and closing
   of shutters at sunrise and sunset respectively for the
   S7-1200/S7-1500?
 (7/20/2016) [90937703]

   You can determine sunrise and sunset using an astronomical
   algorithm. You simply have to specify the longitude and latitude
   coordinates of the location concerned as parameters and set the CPU
   clock to UTC time.
For products:6ES7513-1AL00-0AB0,
   6ES7211-1HD30-0XB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------
13. What should you watch for with configuration control (option
   handling) with fail-safe controllers S7-1200 and S7-1500?
 (8/18/2016) [109481852]

   With configuration control (option handling) with F modules
   additional diagnostics are offered.
For
   products:6ES7138-4FC00-0AB0, 6ES7138-7FN00-0AB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------

------------------------------------------------------------------------
#  Manual
------------------------------------------------------------------------

53. SIMATIC NET Industrial Ethernet/PROFINET Industrial Ethernet -
   System Manual
 (7/15/2016) [27069465]

   05/2016, System manual, C79000-G8976-C242-09
For
   products:6GK7177-1MA10-0AA0, 6GK1716-0HB00-3AN0,...

   more
   => CLICK HERE
------------------------------------------------------------------------
55. SIMATIC NET Industrial Ethernet / PROFINET Passive network
   components - System Manual
 (7/15/2016) [84922825]

   05/2016, System manual, C79000-G8976-C271-01
For
   products:6XV1870-3RH60, 6XV1871-5BN15,...

   more
   => CLICK HERE
------------------------------------------------------------------------
67. Making the transition from S7-200 to S7-1200
 (7/18/2016) [39637591]

   11/2014, Getting Started, A5E02486860-AB
For
   products:6ES7274-1XF30-0XA0, 6ES7211-1HD30-0XB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------

------------------------------------------------------------------------
#  Product note
------------------------------------------------------------------------

74. SIPLUS extreme – With effect from 1 October 2016, the entire SIPLUS
   LOGO! 6 family will be declared phase-out products (PM400).
 (7/19/2016) [109739279]

   From the SIPLUS extreme product range, the entire SIPLUS LOGO! 6
   family will be declared phase-out products (PM400) as per 1 October
   2016. From this date, SIPLUS LOGO! 6 products will remain available
   to customers for at least 1 year as new parts and up to 4 years as
   replacement parts. The SIPLUS extreme product range features
   refined components based on Siemens Industry standard products.
 
For products:6AG1052-2MD00-2BA6, 6AG1052-1FB00-2BA6,...

   more
   => CLICK HERE
------------------------------------------------------------------------
75. LOGO! CM EIB Announcement for product phase-out
 (7/20/2016) [109739299]

   With effect from 1 October 2016, the LOGO! communication module EIB
   will be declared phase-out product (PM400).
For
   products:6BK1700-0BA00-0AA2

   more
   => CLICK HERE
------------------------------------------------------------------------

Interesting references
15. Solutions with which our customers have success

LOGO! automates the spas of the Starpool company
LOGO! 8 automates and controls all parameters and functionalities, such as lighting, heating, electrical loads and emotional path cycles in the spa.
The Web server function integrated in LOGO! 8 has proven its worth because it is now possible to monitor the status of all spas installed by Starpool all over the world.
--> Film
--> www.siemens.com/logo