Wednesday, September 7, 2016

IMPORTANT NOTICE 08 SEPTEMBER 2016

Dear Valued Customers,

Please do take note of the following notice.

Please Take Note the Annual Price Adjustment will take effect from 03 October 2016 onwards



Friday, September 2, 2016

UPDATE 2016 SEPT 02

------------------------------------------------------------------------
#  Application example
------------------------------------------------------------------------
5. Speed Control of SINAMICS V90 with SIMATIC S7-1200 via PROFINET
 (7/19/2016) [109739222]
   Basic application for speed control with SIMATIC S7-1200 and
   SINAMICS V90 via PROFINET
 
For products:6SL3210-5FB10-1UF0, 6SL3210-5FB10-2UF0,...
   more
   => CLICK HERE
-----------------------------------------------------------------------
9. Signaling and Switching via SMS with S7-1200 and CP 1242-7 GPRS V2
   (Set 32)
 (7/19/2016) [58638283]
   A SIMATIC S7-1200 station shall be used to send important messages
   as SMS message to mobile maintenance staff via the CP 1242-7 GPRS
   V2.
For products:6GK7242-7KX31-0XE0, 6GK7243-7KX30-0XE0
   more
   => CLICK HERE
------------------------------------------------------------------------
16. Connecting Telecontrol Stations to a Telecontrol Center in just a
   few Steps
 (7/19/2016) [89633466]
   In these videos, we will show you how to configure a SIMATIC S7
   telecontrol station and connect it to a telecontrol center in just
   a few steps.
For products:6NH7997-7CA31-0GA1,
   6NH7997-7CA31-2GA2,...
   more
   => CLICK HERE
------------------------------------------------------------------------
18. Diagnostics in User Program with S7-1200
 (7/22/2016) [109483251]
   The diagnostics of devices, modules and networks play an
   ever-increasing role in automation technology. By diagnosing with a
   user program, faulty modules can be detected. This enables you to
   also program responses to diagnostic messages.
For
   products:6ES7822-1BA03-4YE5, 6ES7822-1AA03-2YA6,...
   more
   => CLICK HERE
------------------------------------------------------------------------
------------------------------------------------------------------------
#  Download
------------------------------------------------------------------------
16. SIWAREX MULTISCALE – Software for batching plants
 (7/12/2016) [109739136]
   more
   => CLICK HERE
------------------------------------------------------------------------
SIMATIC Automation Tool - the commissioning and service operation
   tool for S7-1200, S7-1500 including ET 200SP CPU and
   decentralized IO modules
 (8/10/2016) [98161300]
   Hereby it takes place the deployment of the SIMATIC Automation
   Tool.
For products:6ES7513-1AL00-0AB0, 6ES7211-1HD30-0XB0,...
   more
   => CLICK HERE
------------------------------------------------------------------------
10. Download firmware 1.4.4 for CP 1242-7 GPRS (6GK7242-7KX30-0XE0)
 (8/18/2016) [109740216]
   Firmware version 1.4.4 for CP 1242-7 GPRS (6GK7242-7KX30-0XE0) is
   available for download.
For products:6GK7242-7KX30-0XE0
   more
   => CLICK HERE
------------------------------------------------------------------------


------------------------------------------------------------------------
#  FAQ
------------------------------------------------------------------------
35. Which information does Technical Support need regarding inquiries
   about SCALANCE products?
 (7/14/2016) [109738574]
   In order to have the Technical Support answer a service request
   precisely and quickly, a description as precise as possible of the
   unclear issue is necessary. Below is a list of the information
   required by the Technical Support for inquiries about SCALANCE
   products.
For products:6GK5302-7GD00-4GA3,
   6GK5213-3BF00-2AB2,...
   more
   => CLICK HERE
------------------------------------------------------------------------
27. In STEP 7 (TIA Portal), how do you program the opening and closing
   of shutters at sunrise and sunset respectively for the
   S7-1200/S7-1500?
 (7/20/2016) [90937703]
   You can determine sunrise and sunset using an astronomical
   algorithm. You simply have to specify the longitude and latitude
   coordinates of the location concerned as parameters and set the CPU
   clock to UTC time.
For products:6ES7513-1AL00-0AB0,
   6ES7211-1HD30-0XB0,...
   more
   => CLICK HERE
------------------------------------------------------------------------
13. What should you watch for with configuration control (option
   handling) with fail-safe controllers S7-1200 and S7-1500?
 (8/18/2016) [109481852]
   With configuration control (option handling) with F modules
   additional diagnostics are offered.
For
   products:6ES7138-4FC00-0AB0, 6ES7138-7FN00-0AB0,...
   more
   => CLICK HERE
------------------------------------------------------------------------
------------------------------------------------------------------------
#  Manual
------------------------------------------------------------------------
53. SIMATIC NET Industrial Ethernet/PROFINET Industrial Ethernet -
   System Manual
 (7/15/2016) [27069465]
   05/2016, System manual, C79000-G8976-C242-09
For
   products:6GK7177-1MA10-0AA0, 6GK1716-0HB00-3AN0,...
   more
   => CLICK HERE
------------------------------------------------------------------------
55. SIMATIC NET Industrial Ethernet / PROFINET Passive network
   components - System Manual
 (7/15/2016) [84922825]
   05/2016, System manual, C79000-G8976-C271-01
For
   products:6XV1870-3RH60, 6XV1871-5BN15,...
   more
   => CLICK HERE
------------------------------------------------------------------------
67. Making the transition from S7-200 to S7-1200
 (7/18/2016) [39637591]
   11/2014, Getting Started, A5E02486860-AB
For
   products:6ES7274-1XF30-0XA0, 6ES7211-1HD30-0XB0,...
   more
   => CLICK HERE
------------------------------------------------------------------------
------------------------------------------------------------------------
#  Product note
------------------------------------------------------------------------
74. SIPLUS extreme – With effect from 1 October 2016, the entire SIPLUS
   LOGO! 6 family will be declared phase-out products (PM400).
 (7/19/2016) [109739279]
   From the SIPLUS extreme product range, the entire SIPLUS LOGO! 6
   family will be declared phase-out products (PM400) as per 1 October
   2016. From this date, SIPLUS LOGO! 6 products will remain available
   to customers for at least 1 year as new parts and up to 4 years as
   replacement parts. The SIPLUS extreme product range features
   refined components based on Siemens Industry standard products.
 
For products:6AG1052-2MD00-2BA6, 6AG1052-1FB00-2BA6,...
   more
   => CLICK HERE
------------------------------------------------------------------------
75. LOGO! CM EIB Announcement for product phase-out
 (7/20/2016) [109739299]
   With effect from 1 October 2016, the LOGO! communication module EIB
   will be declared phase-out product (PM400).
For
   products:6BK1700-0BA00-0AA2
   more
   => CLICK HERE
------------------------------------------------------------------------
Interesting references
15. Solutions with which our customers have success
LOGO! automates the spas of the Starpool company
LOGO! 8 automates and controls all parameters and functionalities, such as lighting, heating, electrical loads and emotional path cycles in the spa.
The Web server function integrated in LOGO! 8 has proven its worth because it is now possible to monitor the status of all spas installed by Starpool all over the world.
--> Film
--> www.siemens.com/logo

Sunday, July 31, 2016

AUGUST 2016 PROMOTION


UPDATE 2016AUG01

------------------------------------------------------------------------
#  Download
------------------------------------------------------------------------

27. Download Firmware 2.1.60 for CP 1242-7 V2, CP 1243-7 LTE, CP 1243-8
   IRC , CP 1243-1
 (6/28/2016) [109738444]

   Download Firmware 2.1.60 for CP 1242-7 V2, CP 1243-7 LTE, CP 1243-8
   IRC , CP 1243-1
For products:6GK7243-1BX30-0XE0,

   6GK7243-7KX30-0XE0,...

   more
   => CLICK HERE
------------------------------------------------------------------------

------------------------------------------------------------------------
#  Application example
------------------------------------------------------------------------

3. Sending and Receiving SMS Messages via a SCALANCE M Router
 (6/15/2016) [54361177]

   A SIMATIC S7-1200/1500 station is to automatically send important
   information about the plant status, alarm messages or warnings to
   mobile service personnel using the SCALANCE M874/M876
   router.
For products:6GK5874-3AA00-2AA2,
6GK5876-3AA02-2BA2

   more
   => CLICK HERE
------------------------------------------------------------------------
6. Communication with S7-CPU via BACnet Gateway
 (6/13/2016) [109476182]

   This application example Shows, how to configure a communivation
   between SIMATIC PLC and a BACnet Network with a gateway.
For

   products:6ES7513-1AL00-0AB0, 6ES7211-1HD30-0XB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------
10. Modular machine concepts with PROFINET (video)
 (6/16/2016) [109486048]

   Increasingly shorter product life cycles also present a challenge
   to production machines. Different variants of a product shall
   always be produced with the same machine. Therefore the design of
   the machines has to be modular. As a result of which the following
   sometimes occurs: Different projects for the numerous individual
   machine variants.
For products:6ES7513-1AL00-0AB0,

   6ES7155-5AA00-0AB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------

------------------------------------------------------------------------
#  FAQ
------------------------------------------------------------------------

17. What are the protection classes of the electrical equipment of
   automation technology?
 (6/16/2016) [109737167]

   Electrical equipment must be of a specific protection class
   corresponding to its loading through foreign objects and water in
   compliance with DIN EN 60529.
For products:6ES7413-2XG00-0AB0,

   6ES7151-7AA13-0AB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------
18. What is the difference between the PROFIsafe address types 1 and 2
   in relation to the uniqueness of the PROFIsafe address?
 (6/16/2016) [109479905]

   The PROFIsafe address is for the unique addressing of the F IO and
   for protecting standard address mechanisms like IP addresses. Here,
   the uniqueness is defined differently with the F IO of the
   PROFIsafe address type 1 and with the F IO of the PROFIsafe address
   type 2. The differences are explained below.
For

   products:6ES7153-2DA80-0XB0, 6ES7157-0AD00-0XA0,...

   more
   => CLICK HERE
------------------------------------------------------------------------
23. How do you set the consistency of the transfer areas in the project
   of the S7-1200 when the communication module CM 1242-5 is
   incorporated via GSD file in the project of the DP master?
 (6/16/2016) [109736643]

   The GSD file of the CM 1242-5 has only input and output modules
   with consistency over the entire length. If you incorporate the CM
   1242-5 via GSD file in the project of the DP master, then in the
   project of the S7-1200 you have to set the consistency of the
   configured transfer areas to "Total length".
For

   products:6GK7242-5DX30-0XE0

   more
   => CLICK HERE
------------------------------------------------------------------------

18. Which ports are released for Modbus/TCP communication and how many
   Modbus clients can communicate with a SIMATIC S7 CPU as Modbus
   server?
 (7/5/2016) [34010717]

   Ports released for Modbus/TCP communication and maximum number of
   Modbus clients that can communicate with a SIMATIC S7 CPU as Modbus
   server.
For products:6ES7317-7TK10-0AB0,

   6ES7317-2FJ10-0AB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------

20. How do you copy memory areas and structured data in STEP 7 (TIA
   Portal)?
 (7/5/2016) [42603881]

   With S7-1200/S7-1500, if you want to copy memory areas, in STEP 7
   (TIA Portal) you use the instructions "MOVE_BLK", "MOVE",
   "Serialize" and "Deserialize".
For products:6ES7513-1AL00-0AB0,

   6ES7211-1HD30-0XB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------
24. How can a WIPOTEC digital load cell be used with SIWAREX WP231?
 (7/7/2016) [109739048]

   FRAGE:   How can a WIPOTEC digital load cell be used with
   SIWAREX WP231? ...
For products:7MH4960-2AA01


   more
   => CLICK HERE
------------------------------------------------------------------------


------------------------------------------------------------------------
#  MANUAL
------------------------------------------------------------------------
29. SIMATIC S7-1200/S7-1500/ET 200MP/ET 200SP/ET 200S/ET 200M/ET
   200iSP/ET 200pro/ET 200eco Updated standards
 (7/5/2016) [109738983]

   06/2016, Product information, A5E38491412-AA
For

   products:6ES7138-4FC00-0AB0, 6ES7833-1FA13-0YA5,...

   more
   => CLICK HERE
------------------------------------------------------------------------
33. SIMATIC NET S7-1200 - TeleControl CP 1243-7 LTE - Operating
   Instructions
 (7/4/2016) [109476704]

   05/2016, Operating instructions, C79000-G8976-C381-02
For

   products:6GK7243-7SX30-0XE0, 6GK7243-7KX30-0XE0

   more
   => CLICK HERE
------------------------------------------------------------------------
34. LICENSE CONDITIONS AND COPYRIGHT NOTICES CP 1242-7 GPRS V2, CP
   1243-7 LTE
 (7/4/2016) [109476705]

   05/2016, Read me
For products:6GK7243-7SX30-0XE0,

   6GK7243-7KX30-0XE0

   more
   => CLICK HERE
------------------------------------------------------------------------


------------------------------------------------------------------------
#  Product note
------------------------------------------------------------------------

59. Delivery release CP 1243-7 LTE (US)
 (7/7/2016) [109739050]

   The CP 1243-7 LTE variant (6GK7243-7SX30-0XE0) for the North
   American market is available ex stock with immediate effect. Thus,
   the following mobile wireless standard frequencies are supported
   from now on:
 
For products:6GK7243-7SX30-0XE0


   more
   => CLICK HERE
------------------------------------------------------------------------
60. Product announcement, sales and delivery release touch pen system
 (7/5/2016) [109738699]

   The touch pen system, which has been designed to operate capacitive
   and recessive touch displays, has been released for delivery with
   immediate effect.
For products:6AV2181-8AV20-0AX0,

   6AV2181-8AV60-0AX0

   more
   => CLICK HERE
------------------------------------------------------------------------

Monday, June 13, 2016

UPDATE 13 JUNE 2016

------------------------------------------------------------------------
#  Application example
------------------------------------------------------------------------
5. Sending and Receiving SMS Messages via a SCALANCE M Router
 (5/23/2016) [54361177]

   A SIMATIC S7-1200/1500 station is to automatically send important
   information about the plant status, alarm messages or warnings to
   mobile service personnel using the SCALANCE M874/M876
   router.
For products:6GK5874-3AA00-2AA2,
6GK5876-3AA02-2BA2

   more
   => CLICK HERE
------------------------------------------------------------------------

1. Inter-Station Communication between S7-1200 Stations Using TCSB V3
   via CP 1242-7 V2
 (5/17/2016) [58099765]

   An automation infrastructure contains S7-1200 substations that are
   to exchange data in a cost-effective way on a wireless
   basis.
For products:6GK7242-7KX31-0XE0


   more
   => CLICK HERE
------------------------------------------------------------------------
2. Data communication between S7-1200 stations and TeleControl Server
   Basic V3 via CP 1242-7 V2 and CP1243-1
 (5/17/2016) [39863979]

   An automation infrastructure contains S7-1200 substations which
   shall communicate cost-effectively with a central station via the
   mobile communications network or via Ethernet. The TeleControl
   Server Basic V3 software is installed in the central
   station.
For products:6GK7242-7KX31-0XE0, 6GK7243-1BX30-0XE0


   more
   => CLICK HERE
------------------------------------------------------------------------
3. Example Blocks for WinCC (TIA Portal) and STEP 7 (TIA Portal) for
   S7-1200 and S7-1500 with SCL
 (5/17/2016) [66839614]

   The function scope of WinCC (TIA Portal) and STEP 7 (TIA Portal)
   can be expanded by technology blocks.
For

   products:6AV2124-1MC01-0AX0, 6ES7513-1AL00-0AB0,...

   more
   => CLICK HERE
------------------------------------------------------------------------
4. Communication between two LOGO! Controllers by means of LOGO! CMR
   and SMS
 (5/3/2016) [109483740]

   In order to supply a remote, elevated region with water, a water
   reservoir is installed and filled by a pump in the valley. The pump
   is to be switched on and off, depending from the filling level of
   the water reservoir.
For products:6EP1331-1SH01,

   6ED1052-2MD00-0BA6,...

   more
   => CLICK HERE
------------------------------------------------------------------------
23. How do you connect a PT100 sensor to the LOGO! analog expansion
   module AM2 PT100 or AM2 RTD?
 (4/25/2016) [23671451]

   To the LOGO! analog expansion module AM2 PT100 or AM2 RTD you can
   connect sensors with 2-conductor, 3-conductor or 4-conductor
   connections.
For products:6ED1055-1MD00-0BA1,

   6ED1055-1MD00-0BA2,...

   more
   => CLICK HERE
------------------------------------------------------------------------
24. With LOGO! how can you configure switching thresholds for analog
   signals?
 (5/4/2016) [24003057]

   Depending on the application you have two different function blocks
   (analog comparator and analog watchdog) to choose from in LOGO!
   SoftComfort for defining switching thresholds.
For

   products:6ED1058-0BA02-0YA0, 6ED1058-0BA02-0YA1,...

   more
   => CLICK HERE
------------------------------------------------------------------------
25. How do you transform digital pulses into an analog value with
   LOGO!?
 (4/27/2016) [50083269]

   Cyclic determination of the number of the digital pulses in a
   defined time period and read-out as an analog value via an analog
   network input.
For products:6ED1058-0BA02-0YA1,

   6ED1058-0CA02-0YE1,...

   more
   => CLICK HERE
------------------------------------------------------------------------
26. How do you change the password for the change of LOGO! mode?
 (4/28/2016) [109482389]

   LOGO! demands a password when you want to change from OP mode to
   Admin mode. Here we show how to change this password.
For

   products:6ED1052-2FB00-0BA8, 6ED1052-1HB00-0BA8,...

   more
   => CLICK HERE
------------------------------------------------------------------------
27. How do you monitor a connection between two LOGO! 8 basic modules?
 (4/28/2016) [109483102]

   To make sure that data is exchanged between two LOGO! basic modules
   you have to monitor the connection.
For

   products:6ED1052-1HB00-0BA8, 6ED1052-1FB00-0BA8,...

   more
   => CLICK HERE
------------------------------------------------------------------------
28. Which LOGO! device series can you use for a program created with
   LOGO!Soft Comfort V8?
 (5/4/2016) [109483221]

   With LOGO!Soft Comfort V8 you can also create control programs for
   previous LOGO! device series. However, you cannot load any programs
   that use the new special functions or the new special function
   parameters into LOGO! basic modules previous to device series
   0BA8.
For products:6ED1058-0BA08-0YA1


   more
   => CLICK HERE